No products matched your keyword.
Try browsing the categories or searching a part number.
The i1600 and the i3200 share one block, one print width and one droplet set. The only real change is nozzle rows, four against eight, so throughput depends on
Read MoreUV DTF transfers fail in three separate places: the print, the lamination, and the hand application. This guide shows how to name the symptom first, why the A f
Read MoreKyocera KJ4A and KJ4B printheads share the same footprint, nozzle count and width, but one is built for UV ink and one for water-based. This guide covers how to
Read MorePrinthead life gets counted in months, and that number hides the only variable that matters: how much ink the head has moved. Track ink volume, cleanings per sq
Read MoreA printhead that mounts perfectly can still be built for the wrong ink chemistry, and the damage usually shows up weeks later as deflection, seal swelling and d
Read MoreNine components sit between an ink bottle and a sheet of DTF film, and the white channel touches every one. This walk through the ink path names each consumable
Read MoreOne transfer, two fabrics, two results. The press settings that work on cotton rarely survive the trip to polyester. This guide swaps the usual chart for a ladd
Read MoreMost shops blame the powder for a transfer that peels, then buy a different powder and get the same result. This guide explains what mesh size really controls,
Read MoreWhite ink settles in hours, not days, which is why Monday morning underbases come out gray. This guide covers the circulation routine that keeps titanium dioxid
Read MoreMost shops flush too rarely, then flush too hard when something finally breaks. This guide separates a line flush from an ordinary cleaning cycle, gives three s
Read MoreA failing cap and a failing printhead look identical on a nozzle check, which is why so many good heads get replaced for no reason. This guide gives the daily w
Read MoreWhite ink that recovers after a cleaning and then fades again is usually a supply problem, not a dead printhead. Work five checks in strict cost order: bag cond
Read MoreBanding is a measurement, not a mystery. Measure the distance between consecutive bands, compare that pitch with the feed step of your pass mode, and the machin
Read More
A practical guide to the differences between i3200-A1, E1 and U1 printheads, including ink type, applications and compatibility.
Read MoreWe use cookies to keep this site working and, with your consent, to measure traffic. You can change your choice any time. Cookie Policy Privacy Policy