Epson S-Series Printhead Codes: Which One Is Actually Current?
Nov 6, 2026 · 13 min readThree parts sites list three different current numbers for the same Epson S-Series printhead, and none of them is lying. Here is why the replacement chain split
Read MoreRagged Media Cut: What to Check Before Replacing the Blade
Nov 6, 2026 · 7 min readA ragged cut on a print and cut machine is rarely the blade. Run one test square, read the backing instead of the edge, then work the list from the free checks
Read MoreHow to Check Shop Power Before You Buy Printer Parts
Nov 5, 2026 · 6 min readYour printer resets mid job, prints wet at the trailing edge, or loses a row of nozzles the morning after a power cut, and none of that looks electrical. This i
Read MoreCanon Colorado 1650: Which Spares Stop the Machine First
Nov 4, 2026 · 11 min readA Colorado 1650 stops for a short list of consumables and hesitates for a longer one. This sorts the Canon consumables list into items that halt production, ite
Read MoreNew Printhead Prints Faint: Check the Rank and Voltage First
Nov 4, 2026 · 11 min readA new printhead that prints a clean nozzle check and a faint image is usually running on the old head's voltage. Check the five digit ID label on the side of th
Read MoreHow to Read Ghosting Direction on a Wide Format Printer
Nov 3, 2026 · 9 min readGhosting rarely means a dead printhead. It shows up as a second edge on text and lines, and a clean nozzle check does not rule it out. Read the offset direction
Read MoreDamper Fits but Still Starves: What to Measure Before You Reorder
Nov 3, 2026 · 8 min readTwo dampers with the same label can both fit the same head and still fail differently. This covers the four dimensions that decide fit: tube connector size, o-r
Read MoreHow to Tell Why Your Waste Ink Bottle Fills So Fast
Nov 2, 2026 · 8 min readA waste ink bottle that fills too fast is usually a maintenance station problem, not a print volume problem. Read what the counter counts, find the three places
Read MoreEpson i1600 vs i3200: What the Extra Nozzle Rows Actually Buy
Nov 1, 2026 · 11 min readThe i1600 and the i3200 share one block, one print width and one droplet set. The only real change is nozzle rows, four against eight, so throughput depends on
Read MoreHow to Read HP Latex Printhead Life Before You Order a Replacement
Nov 1, 2026 · 7 min readThe counter on an HP Latex panel measures ink consumed, not output still available. Read the head counter, the printed nozzle check, and the maintenance cartrid
Read MorePrinthead Cable or Dead Printhead: How to Tell Them Apart
Oct 31, 2026 · 11 min readA printhead cable with a broken conductor looks healthy, so judge by behavior instead of appearance. Print the same short strip at two carriage positions and co
Read MoreHow to Store a Spare Printhead So It Still Works in a Year
Oct 31, 2026 · 8 min readA spare printhead has two halves that want opposite conditions. The nozzles have to stay wet and the circuit board has to stay dry, so drying agents and moistur
Read MoreNozzle Check Dropout vs Deflection: What Each Pattern Tells You
Oct 30, 2026 · 9 min readHalf a black row missing on the morning nozzle check is not automatically a dead printhead. Three test sheets, read in the right order, separate air in the ink
Read MoreHow to Apply UV DTF Transfers Without Bubbles or Lifting
Oct 30, 2026 · 10 min readUV DTF transfers fail in three separate places: the print, the lamination, and the hand application. This guide shows how to name the symptom first, why the A f
Read MoreEpson SureColor S-Series: Why White and Silver Share One Slot
Oct 29, 2026 · 9 min readAn S80600 has ten ink slots but only nine hold colors. The tenth takes either a White or a Metallic Silver cartridge, never both. Here is how the slot map diffe
Read MoreKJ4A vs KJ4B: Which Kyocera Head Fits Your Ink?
Oct 29, 2026 · 7 min readKyocera KJ4A and KJ4B printheads share the same footprint, nozzle count and width, but one is built for UV ink and one for water-based. This guide covers how to
Read More