What Actually Kills a Printhead: Five Failure Modes and How to Spot Each One Before You Replace It
Oct 22, 2026 · 7 min readCount the parts between the ink bag and the nozzle plate and you find ten components, eight of which can destroy the most expensive one in the machine. These fi
Read MoreDX5 vs DX7: What Actually Changed Inside the Head and Which Refurbished Units Are Worth Buying
Oct 22, 2026 · 8 min readThe DX7 is not simply a faster DX5, and a cheap refurbished unit is not always a bargain. Here is what really differs between the two heads, where that differen
Read MoreBanding on Wide Format Prints: Reading the Spacing Between Bands to Find the Real Cause Fast
Oct 22, 2026 · 10 min readBanding is a measurement, not a mystery. Measure the distance between consecutive bands, compare that pitch with the feed step of your pass mode, and the machin
Read MoreWide Format Banding That Appears Mid Roll: 8 Checks to Run From Cheapest to Most Expensive
Oct 22, 2026 · 11 min readBanding that starts halfway through a roll rarely means a dead printhead. Measure the interval between bands first, then work the checks in cost order: nozzle p
Read More
Epson i3200-A1 vs E1 vs U1: What's the Difference?
Oct 22, 2026 · 8 min readA practical guide to the differences between i3200-A1, E1 and U1 printheads, including ink type, applications and compatibility.
Read More