Printer Parts & Printhead Guides

Maintenance Tips

Ink Line Flushing: How Often, With What, and What It Actually Costs a Working Print Shop

Oct 22, 2026 · 8 min read

Most shops flush too rarely, then flush too hard when something finally breaks. This guide separates a line flush from an ordinary cleaning cycle, gives three signals that set the real interval for your machine, and walks the procedure step by step on the bench with an honest account of fluid, ink, labor, and the quiet refill mistake almost everyone makes.

Long Shutdown Procedure: How to Put a Solvent Printer to Sleep for Two Weeks Without Losing a Single Nozzle

Oct 22, 2026 · 9 min read

Two weeks of silence is enough to turn solvent ink into varnish inside a printhead. This hour by hour shutdown plan covers how to decide between standby and full sleep, what to flush and clamp before locking up, what the machine does while you are gone, and the wake up order that avoids a power clean spiral on Monday morning.

The Capping Station and Wiper: When to Clean, When to Replace, and How to Tell the Difference Before Your Nozzle Check Fails

Oct 22, 2026 · 8 min read

A failing cap and a failing printhead look identical on a nozzle check, which is why so many good heads get replaced for no reason. This guide gives the daily wipe routine, five shop floor tests that separate a dirty cap from a worn one, and the everyday habits that ruin a brand new cap in a month.

PRINTHEADS

PRINTER SPARE PARTS

ORIGINAL PRINTER PARTS

CONVERSION KITS

DTF & UV DTF SOLUTIONS

3D Printing Insights & Material Guides

Ink Line Flushing: How Often, With What, and What It Actually Costs a Working Print Shop

Long Shutdown Procedure: How to Put a Solvent Printer to Sleep for Two Weeks Without Losing a Single Nozzle

The Capping Station and Wiper: When to Clean, When to Replace, and How to Tell the Difference Before Your Nozzle Check Fails