Three parts sites list three different current numbers for the same Epson S-Series printhead, and none of them is lying. Here is why the replacement chain split
Read MoreA ragged cut on a print and cut machine is rarely the blade. Run one test square, read the backing instead of the edge, then work the list from the free checks
Read MoreYour printer resets mid job, prints wet at the trailing edge, or loses a row of nozzles the morning after a power cut, and none of that looks electrical. This i
Read MoreA Colorado 1650 stops for a short list of consumables and hesitates for a longer one. This sorts the Canon consumables list into items that halt production, ite
Read MoreA new printhead that prints a clean nozzle check and a faint image is usually running on the old head's voltage. Check the five digit ID label on the side of th
Read MoreGhosting rarely means a dead printhead. It shows up as a second edge on text and lines, and a clean nozzle check does not rule it out. Read the offset direction
Read MoreTwo dampers with the same label can both fit the same head and still fail differently. This covers the four dimensions that decide fit: tube connector size, o-r
Read MoreA waste ink bottle that fills too fast is usually a maintenance station problem, not a print volume problem. Read what the counter counts, find the three places
Read MoreThe i1600 and the i3200 share one block, one print width and one droplet set. The only real change is nozzle rows, four against eight, so throughput depends on
Read MoreThe counter on an HP Latex panel measures ink consumed, not output still available. Read the head counter, the printed nozzle check, and the maintenance cartrid
Read MoreA printhead cable with a broken conductor looks healthy, so judge by behavior instead of appearance. Print the same short strip at two carriage positions and co
Read MoreA spare printhead has two halves that want opposite conditions. The nozzles have to stay wet and the circuit board has to stay dry, so drying agents and moistur
Read MoreHalf a black row missing on the morning nozzle check is not automatically a dead printhead. Three test sheets, read in the right order, separate air in the ink
Read MoreUV DTF transfers fail in three separate places: the print, the lamination, and the hand application. This guide shows how to name the symptom first, why the A f
Read MoreAn S80600 has ten ink slots but only nine hold colors. The tenth takes either a White or a Metallic Silver cartridge, never both. Here is how the slot map diffe
Read MoreKyocera KJ4A and KJ4B printheads share the same footprint, nozzle count and width, but one is built for UV ink and one for water-based. This guide covers how to
Read MoreWe use cookies to keep this site working and, with your consent, to measure traffic. You can change your choice any time. Cookie Policy Privacy Policy
