The Roland TrueVIS VG2 has four wear parts between the ink pouch and the nozzle plate: cap top, damper, wiper, cleaner pad. Each one fails with a different sign
Read MoreA Colorado 1650 stops for a short list of consumables and hesitates for a longer one. This sorts the Canon consumables list into items that halt production, ite
Read MoreA waste ink bottle that fills too fast is usually a maintenance station problem, not a print volume problem. Read what the counter counts, find the three places
Read MoreUV DTF transfers fail in three separate places: the print, the lamination, and the hand application. This guide shows how to name the symptom first, why the A f
Read MoreAn S80600 has ten ink slots but only nine hold colors. The tenth takes either a White or a Metallic Silver cartridge, never both. Here is how the slot map diffe
Read MoreInk on the printhead nose is usually not a dead printhead. Clean the nozzle plate, park the carriage, and then read when the drip comes back: while idle, mid pr
Read MoreA wide format ink pump fails slowly, and by the time the nozzles go quiet most shops have already ordered a printhead. One cleaning cycle with your eyes on the
Read MoreThe panel code is a location, not a diagnosis. Pull the error history first, sort the codes by when they appeared, and read the subsystem name rather than the n
Read MoreFollow one JV300 through a working day and the real consumables map writes itself: the moments when a part decides whether the shift finishes on time. Here is w
Read MoreA dirty encoder strip mimics a dying printhead, a slipping belt, and a bad carriage board, which is why shops replace the wrong part first. Here is the cleaning
Read MoreOne transfer, two fabrics, two results. The press settings that work on cotton rarely survive the trip to polyester. This guide swaps the usual chart for a ladd
Read MoreMost shops flush too rarely, then flush too hard when something finally breaks. This guide separates a line flush from an ordinary cleaning cycle, gives three s
Read MoreA failing cap and a failing printhead look identical on a nozzle check, which is why so many good heads get replaced for no reason. This guide gives the daily w
Read MoreGen5 and Gen6 look like siblings on the bench and behave nothing alike in production. One buys ink latitude and forgiveness, the other buys finer detail and far
Read MoreThe DX7 is not simply a faster DX5, and a cheap refurbished unit is not always a bargain. Here is what really differs between the two heads, where that differen
Read MoreBanding that starts halfway through a roll rarely means a dead printhead. Measure the interval between bands first, then work the checks in cost order: nozzle p
Read MoreWe use cookies to keep this site working and, with your consent, to measure traffic. You can change your choice any time. Cookie Policy Privacy Policy
