No products matched your keyword.
Try browsing the categories or searching a part number.
Ghosting rarely means a dead printhead. It shows up as a second edge on text and lines, and a clean nozzle check does not rule it out. Read the offset direction
Read MoreTwo dampers with the same label can both fit the same head and still fail differently. This covers the four dimensions that decide fit: tube connector size, o-r
Read MoreA waste ink bottle that fills too fast is usually a maintenance station problem, not a print volume problem. Read what the counter counts, find the three places
Read MoreThe i1600 and the i3200 share one block, one print width and one droplet set. The only real change is nozzle rows, four against eight, so throughput depends on
Read MoreThe counter on an HP Latex panel measures ink consumed, not output still available. Read the head counter, the printed nozzle check, and the maintenance cartrid
Read MoreA printhead cable with a broken conductor looks healthy, so judge by behavior instead of appearance. Print the same short strip at two carriage positions and co
Read MoreHalf a black row missing on the morning nozzle check is not automatically a dead printhead. Three test sheets, read in the right order, separate air in the ink
Read MoreAn S80600 has ten ink slots but only nine hold colors. The tenth takes either a White or a Metallic Silver cartridge, never both. Here is how the slot map diffe
Read MoreKyocera KJ4A and KJ4B printheads share the same footprint, nozzle count and width, but one is built for UV ink and one for water-based. This guide covers how to
Read MoreCrooked prints on a roll fed machine come from three places: media pulled at an angle, media gripped unevenly, or media not held flat. Mark both edges at one me
Read MoreThree heater zones on a Roland XF-640 do three different jobs, and the setpoint ranges are narrow on purpose. Here is what the preheater, the print heater and t
Read MoreInk on the printhead nose is usually not a dead printhead. Clean the nozzle plate, park the carriage, and then read when the drip comes back: while idle, mid pr
Read MoreEvery KM1024i variant measures the same on the bench, so the label decides which one your machine needs. This breaks the lineup by drop size, firing frequency a
Read MorePrinthead life gets counted in months, and that number hides the only variable that matters: how much ink the head has moved. Track ink volume, cleanings per sq
Read MoreThe panel code is a location, not a diagnosis. Pull the error history first, sort the codes by when they appeared, and read the subsystem name rather than the n
Read MoreThe CR motor is the part most shops blame and the part that is usually fine. Stretched belts, glazed pulleys, dry rails and dragging ink tubes cause most carria
Read MoreWe use cookies to keep this site working and, with your consent, to measure traffic. You can change your choice any time. Cookie Policy Privacy Policy